Skip to main content

LIBRA Total Quality

Non-Destructive Testing (NDT)

Testing for materials and welded joints

LIBRA provides non-destructive testing (NDT) for materials and welded joints, with technical reports documenting the examination. The service addresses material integrity and weld quality during fabrication, maintenance and commissioning. The component, project specification and examination objective define the work.

START WITH THE REQUIREMENT

Five methods, different examination needs

NDT examines an item without damaging it. The method depends on the material, joint or area to examine and the discontinuities being investigated. Geometry, surface condition and access determine how much of the item can be examined.

VT, PT, MT, UT and RT are the methods described below. Selection, extent and acceptance criteria must follow the applicable specification and procedure. A surface examination and an examination of the internal structure provide different information.

VT

MethodExamination focus
VTVisual testing. Examination of visible surface conditions.

PT / MT

MethodExamination focus
PTPenetrant testing. Surface-breaking discontinuities in suitable non-porous materials.
MTMagnetic particle testing. Surface and near-surface discontinuities in ferromagnetic materials.

UT / RT

MethodExamination focus
UTUltrasonic testing. Examination using sound waves, including relevant internal discontinuities.
RTRadiographic testing. Examination using radiation to form an image of the internal structure.

An indication is evaluated against the applicable acceptance criteria. Its presence alone does not establish whether a component is acceptable. The result also has to be read within the examination’s coverage and limitations: an unexamined area cannot be treated as checked.

HOW THE ASSIGNMENT TAKES SHAPE

Define the item, examination and responsibilities

Requirements

  • Component or weld identification, material and geometry.
  • Fabrication, maintenance or commissioning stage, and the area or issue to investigate.

Activities

  • Method, procedure, examination extent and acceptance criteria.
  • Surface preparation, access and site arrangements needed for that examination.

Responsibilities

  • Execution, witnessing or report review: the role required.
  • Personnel qualification requirements and parties responsible for evaluation and acceptance.

A request for test execution, witnessing or review of an existing report leads to a different assignment. For execution, the method, procedure, equipment and relevant personnel qualification requirements are established for the component and location. Evaluation and acceptance responsibilities are agreed at the same stage.

This is where operational feasibility and timing are checked. A list of methods does not establish availability for every item or site; the agreed scope identifies the examination and the personnel requirements for the actual work.

What the NDT report needs to show

The technical report links the component or weld, method, procedure and area examined. Conditions, results and evaluation criteria make the examination understandable to the receiving team. Inaccessible areas and other coverage limits need to remain visible.

The recorded result, any request for further examination and the final acceptance decision are distinct. Keeping them separate lets the reader understand what has been checked, what remains open and which decision is still required.

Connect testing to inspection and welding

NDT can be part of a fabrication, maintenance or commissioning control plan. An inspection visit checks the defined stage or item; a specified NDT examination has its own method, extent and record. Welding support connects the examination requirements to the relevant welding documentation.

Identify the required test and checkpoint when the activities are planned together. This keeps the examination result connected to the component’s quality records and avoids treating attendance at a visit as evidence that every specified test has been performed.

Discuss the examination required

Send the component or weld reference, material, location and required date. Include the specification and method if known, and say whether you need execution, witnessing or review of a report. These details establish the basis for discussing the work.

LET’S DEFINE YOUR NDT SCOPE

What needs
your attention?

Describe the item, examination needed and whether you need execution, witnessing or report review.

Useful starting information

Material or weld, location, applicable specification and timing help define the examination.

Prefer to contact LIBRA directly?
SELECTED SERVICE · NON-DESTRUCTIVE TESTING (NDT)

Discuss NDT requirements

If the method is not yet defined, describe the item and the decision the test must support.


TECHNICAL DETAILS

NDT examination
scope and records

Define the item, method, acceptance criteria, responsibilities and report required.

The method follows the item, material, defect or condition of concern and applicable project specification. VT, PT, MT, UT and RT address different examination needs; the agreed scope identifies the method and coverage.

The report should identify the item, location, method, procedure, relevant parameters, results and applicable acceptance criteria. Any indication and its disposition must remain traceable to the examined area.

INDUSTRIAL APPLICATIONS

NDT examinations
in industrial contexts

Explore the industrial contexts in which this requirement may arise.

Oil and gas equipment

Oil & Gas

Examination of critical equipment and welded joints.

Industrial machinery and electrical systems

Mechanical & Electrical

Material and joint checks on mechanical components.

Wind turbines and solar panels

Renewable Energy

Examination of fabricated equipment and connections.

Industrial manufacturing plant

Industrial Manufacturing

Testing of materials and welds through production.

BEFORE YOU GET IN TOUCH

Before you enquire

No. Describe the item, material, project requirement and concern; the appropriate examination can then be discussed.

The assignment can be defined around execution, witnessing or technical review, depending on the project need and operational availability.

NDT is an examination method. Inspection places a check against defined requirements within the wider quality plan; the activities can be coordinated.

Start with the
item to examine

Item, material and requirement make the examination easier to define.